|
|
|
|
Joined: Jan 2007
Posts: 2
Member
|
|
Member
Joined: Jan 2007
Posts: 2 |
Has anyone configured 2000IPS to output SMDR via IP? I can get it work, and any help would be appreciated.
I have tried a recommeded command below, and launched Hyperterminal to test SMDR output, got no luck as it has no SMDR data being sent out by PABX. When i pressed enter button on keyboard then it came with "3000030052" but doesn't seem to be SMDRs data, and has no idea on this numbers.
Command
=======
0B00>00:wwwxxxyyyzzz ; IP address of CP24
0B00>01:wwwxxxyyyzzz ; Mask
0B00>02:wwwxxxyyyzzz ; Gateway
save and reset
0401>05:0 ; Destination of built-in SMDR to LAN
0401>08:00 ; Extended message format
15 ; Standard message format (default)
Port : 60010
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Did you check cm1306? Can you ping the MP card?
|
|
|
|
|
Joined: Jan 2007
Posts: 2
Member
|
|
Member
Joined: Jan 2007
Posts: 2 |
Yes, I can ping the card. I can also telnet to the card, but has the same result with Hyperterminal
|
|
|
|
|
Joined: Jul 2006
Posts: 10
Member
|
|
Member
Joined: Jul 2006
Posts: 10 |
i have same problem with you about SMDR via IP. i think SMDR's data can't capture via hyperterminal.i think different concept between SMDR via IP and SMDR via RS232.are you have manual book about format message SMDR via IP ?
|
|
|
|
|
Joined: Feb 2007
Posts: 1
Member
|
|
Member
Joined: Feb 2007
Posts: 1 |
For what it's worth, I am attempting to do the same thing, and a gentleman from another forum informed me that you cannot do SMDR without a license from NEC. I am only assuming that I do not have a license, but I do not have PC PRO to be able to get into the system to confirm what licenses I have... any thought on that? ...my 2 cents Originally posted by tmrwsol22:
Has anyone configured 2000IPS to output SMDR via IP? I can get it work, and any help would be appreciated.
I have tried a recommeded command below, and launched Hyperterminal to test SMDR output, got no luck as it has no SMDR data being sent out by PABX. When i pressed enter button on keyboard then it came with "3000030052" but doesn't seem to be SMDRs data, and has no idea on this numbers.
Command
=======
0B00>00:wwwxxxyyyzzz ; IP address of CP24
0B00>01:wwwxxxyyyzzz ; Mask
0B00>02:wwwxxxyyyzzz ; Gateway
save and reset
0401>05:0 ; Destination of built-in SMDR to LAN
0401>08:00 ; Extended message format
15 ; Standard message format (default)
Port : 60010
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Command F88>01> through about F88>20> or so should show you all of the loaded options for an IVS2 or IPS. You should be able to see this command in CAT or MAT mode.
*** Note: DO NOT ATTEMPT TO CHANGE ANY DATA UNDER COMMAND F8 !! ***
|
|
|
|
Forums84
Topics94,527
Posts640,019
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
183
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
