|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
Hi. When installing a PRT card on a IPK 192, I would like to ask if anyone knows how to test my PRT card. I can't seem to figure out how to make it work. I've completed everything there is to be done in the programming side, 1-8-33 7-1 1-13-00 1-13-05 and so on.. But when I connect the system to an ISDN network the alarms won't go. I'v tried a loop back test but the alarms still remain. Is there a certain switch setting i have to apply? Thanks in advance. Hope you guys could help me out.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
You have to be sure that you have Clock module installed on CPU and your switches has to be set up to match the right protokol.
SW1,2,3-ON SW4-OFF = NI2
Sw1-Off, 2-ON, 3-ON, 4-OFF = 4ESS
SW1-OFF, 2-OFF, 3-ON, 4-OFF = 5ESS(Lucent Custom)
ON, ON, OFF, OFF = DMS-100(Custom)
|
|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
Hw bout with the loop back tests? Shouldn't the alarms go off when I do a loop back? What happens is while the card is starting up the L1, SLIP, RAI, and LOF LED's turn red while the AIS LED turns blinking red. Yup i already have the Clock card installed on my CPU.
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
137
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
