|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
101 is not used. I think in the earlier manuals it was documented to use 101, this is a mis-print
We get old too soon, smart too late
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 8
Member
|
|
Member
Joined: Mar 2007
Posts: 8 |
Thank you IPKII and DANS for clearing up the IPKII
programming. So my programming is correct. I installed this system MAY 2006. It works great. I did not receive one single service call. It was last Monday when Caller ID was added. It was then I discovered it was not showing CID on Inmail transferred calls in MODE 2.I could swear that this feature worked fine before I took the system on site. My lines Have cid when I tested and programmed the system. Dans,I am glad that you cleared up the 101.102 in MODE 2 works fine.I think my software is 1.00.I will have to check that again. With my test set on the CO line,this thing grabs the call on the very first ring.As TIP&RING said I might have to use a secondary ring group to create the delay. I don't know how to do that.So any help would be great. Thanks for all your help and input.
Best Regards
Jag
|
|
|
|
|
Joined: Mar 2007
Posts: 8
Member
|
|
Member
Joined: Mar 2007
Posts: 8 |
Ok Guys, I will do as IPKII suggested. I will remove programming 22-05-01 for MODE 2. I will Change the trunks in 22-02-01 to MODE 2 as TYPE 4.Then I will DIL the trunks in 22-07-01 MODE 2 to the inmail pilot number 200. If this does not work,I will try using 22-08-01 in MODE 2 to created the delay. I wil l do this on Tuesday.I will post the results.
Best Regards
Jag
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
You should do what IPKII suggested and upgrade software to 1.60. It's easy and does not take long to do.
We get old too soon, smart too late
|
|
|
|
|
Joined: Mar 2007
Posts: 8
Member
|
|
Member
Joined: Mar 2007
Posts: 8 |
Hi Guys, I want to thank everyone,especially IPKII and Dans for their input. The programming changes I made did the trick. Once I removed the trunks from 22-02-01 in mode 2,assigned them as DIL's and DIL them to the INMAIL pilot number MODE 2,the inmail waited for the CID packet. So it is working fine. I will try and get the system upgraded.So I get some reading to do. Once again a big thank you to all.
Best Regards
JAG
|
|
|
|
Forums84
Topics94,523
Posts640,001
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
224
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
