|
|
|
|
Joined: Jun 2006
Posts: 17
Member
|
|
Member
Joined: Jun 2006
Posts: 17 |
Need a little help.
I have two systems connected via T1 trunks.
(Nitsuko 124i & IPK II)
From the Nitsuko, I can dial an IPK extension by directly accessing a trunk by dialing #9.
If I just dial the extension, it DOES route through the correct trunk but it never rings the extension.
I get the same problem when calling a Nitsuko extension from the IPK, except that it
looks like the call connected because the call timer kicks in but it hangs up within 1 second.
Now, from the IPK, I can't seem to use the same trick of directly accessing a trunk by dialing #9 first.
The next digit entered, after the two digit trunk, causes a busy signal, even though
I've enable direct acces for the trunk.
So, the f-routes seem to be setup right.
ARS is not enable on either side and I had to disable CCIS on the IPK to get this far.
What am I missing?
Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
Have you done any programming in the 11- range? (system number). That is best point of direction I can give you, as of now all our installs we have left this at default.
We get old too soon, smart too late
|
|
|
|
|
Joined: Jun 2006
Posts: 17
Member
|
|
Member
Joined: Jun 2006
Posts: 17 |
Yes, I have setup the system numbering and everything seems to look good there.
As I mentioned, I CAN call from the Nitsuko to the IPK.
I just first have to access the trunk directly by dialing # 9, entering the trunk number, and then dialing an extension.
Previously, I actually had two Nitsuko 124i systems "tied" together using T1 trunking but
I just upgraded one of them to the IPK II.
NEC bought-out Nitsuko and the two systems
are similar in their programming.
I'm just missing something on the IPK and can't seem to pinpoint it.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Just a hunch but, I bet the Aspire would be able to network.
|
|
|
|
|
Joined: Jun 2006
Posts: 17
Member
|
|
Member
Joined: Jun 2006
Posts: 17 |
Ok, you lost me.
I have a 124i not an Aspire.
However, I also considered that possibility but, according to my programming manual,
the networking capability was only available with the 384i.(??)
It would be nice though.
|
|
|
|
|
Joined: Jun 2006
Posts: 17
Member
|
|
Member
Joined: Jun 2006
Posts: 17 |
Figured out that in order to call the Nitsuko from the IPK, I need to add ** in front of the extension.
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
158
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
