|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
Hi I am new here. I am trying to install a system I have never dealt with before. I cannot find a programming manual for the 192. I keep finding the IPK manual but no 192. Also do you need a MIFM card in the system to program threw a PC??? Any help would be greatly appreicated.
Best Regards
Chris Espinoza
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
Yes, you will need the MIF card for pc programming as well as the SAT software loaded on the PC.
99% of the programming in the IPK manual (not IPK II) is the same for the 192. If you have that manual, you're pretty much there.
"I didn't do it, and I won't do it again"
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
is there a easy way to program feature keys?? also how do I add a day/night button
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
Check to see if you have keys programmed as Feature Access keys by pressing: [Feature] and the button you want to program. If it is a feature access key, the display will read "UNUSED".
Day/Night Mode:
Press [Feature]
Press [Redial]
dial #80
Press [Answer]
Press [Feature] Twice
DSS One-Touch (hotline) keys:
Press [Feature]
Press [Redial]
dial 1 plus the extension #
Press [Feature]
All Page:
Press [Feature]
Press [Redial]
dial 1 51
Press [Feature]
Voice Mail Access:
Press [Feature]
Press [Redial]
dial 1 plus the voice mail pilot #
Press [Feature]
"I didn't do it, and I won't do it again"
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Apr 2005
Posts: 2,532 Likes: 5
Member
|
|
Member
Joined: Apr 2005
Posts: 2,532 Likes: 5 |
DSS One-Touch you need to add either 1 or 2 after the extension number, than press feature.
Feature, redial, press button to program, dial 1, extension number, press 1 or 2, feature.
1 equals station ringing when button is pressed.
2 equals hands free answer answer back
We get old too soon, smart too late
|
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
|
Member
Joined: Nov 2007
Posts: 50 |
I got another question, I have installed the system and everything works except CO6..here is the wierd thing when you try to use the line for outgoing calls it doesn't give you dial tone, (I tested the CO from the demarc so I know that is not the problem) ok so I dial in to the CO 6 and it rings in and can be answered and call is clear and everything...any clues?? did I miss something or is it just a bad CO card????
Best Regards
Chris Espinoza
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
That would my 1st guess...
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
Check the assignment of Line Key 6.... Press [Feature], then line key 6. Make sure the display reads CO6.
Then in memory block 3-02 make sure line key 1 is lit green (inbound, outbound calls). If line key 2 is lit green it is programmed for inbound calls only.
"I didn't do it, and I won't do it again"
|
|
|
|
Forums84
Topics94,581
Posts640,270
Members49,879
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
403
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
