sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems SAT Connection failed

I am trying to connect to an Electra Elite 192 and get the following error:

PC Program does not support this KTS version (SP039 9.70 17) when running in "<=S7000" mode.
I also get it when I try to run in <=8000 mode and IPK mode.

I am running SAT 4.62, for fun I tried an older SAT 1.0 and same thing.
The system has a CPUB 300 U1-0 card in the CPU slot and an MIFM -U10 ETU in the ISA slot lot-341E

Any ideas as to what could be wrong?

Thanks,

I think the latest version of SAT is 4.70

9.7 was the last software release for the 48 and 192.

Sounds like a compatibility issue between your older version of SAT and and the KSU software.

D

SAT 4.70 is the latest version. Try it in IPK mode.

That doesn't make sense to me. I would think that since it is an elite 192, the 4.62 SAT should work. I could see having an issue if this were an IPK with a higher release than the SAT, but the 4.62 has connected to other 192 no problem.

You're at version 9.70, that's IPK level software.

I did try it with selecting IPK and that didn't work, so you think the SAT is too low and that is the problem?

Yes that is what IpkII is trying to say.

You have a higher version firmware than a normal 192. Your really at a higher level IPK firmware. So SAT 4.70 will help you connect.