|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
I have replaced a 0-8 ext card with an 3-08 card in slot 2 and moved the old card to slot 3
the problem is the co's wont come up.
I have the buttons programmed for co 4-6 and even tried setting one up as co 7
I have went through the line settings and could not see anything, so I am thinking it is something with slot to card settings
Normaly a panasonic-siemens man
Thanks
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2005
Posts: 1,336
Member
|
|
Member
Joined: Jul 2005
Posts: 1,336 |
I have found the auto detection flackey on these systems some times.
Take a download of the system before you changed the card, Press F11 and set the cards in their new slots and check for the correct trunk assignment. Default the system and reload again. Usually sorts out the problem..
Regards,
Paul W
Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
|
Joined: Nov 2008
Posts: 4
Member
|
|
Member
Joined: Nov 2008
Posts: 4 |
You need to connect to the XN-120 using PC Pro and take a download of the card configuration. Then remove the card physically and also remove it from the card configuration. Upload the card configuration without this card and then you can physically install the cards as these slots will now be blank. Hope this works
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Thanks for your replies, I will be up there today and will try that, I was hoping it was only a program to tell the system the lines are connected
Will let ye know how it works out
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Ok guys, thanks again for your advice.
What i did was( like ye said) I could not change the card in the software so I downloaded the system and modified the card type in batch and set up the trunks as required. then i defaulted the system. uploaded the new batch file and it worked first time.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
1,426
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
