|
|
Joined: Mar 2006
Posts: 193
Member
|
OP
Member
Joined: Mar 2006
Posts: 193 |
I have a customer that uses an Aspire M for their phones, they just switched over to a PRI from analog lines. Is there a way to block their caller-id on their phones when they make an outgoing call? They used to input *67 before each call to do their accounts receivable.
Chris
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2008
Posts: 683
Member
|
|
Member
Joined: Feb 2008
Posts: 683 |
Program 20-08-15 will automatically insert a *67 into the number dialed for extensions in that COS. Program 14-01-20 will allow certain channels to block outgoing caller ID. Sounds like you might have to set up a separate outgoing trunk group to make this work. I must add that I've never tried it on a PRI though.
St Petersburg
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
Also, look at programs 21-12-01 and 21-13-01 for outgoing caller ID per trunk and per station.
"I didn't do it, and I won't do it again"
|
|
|
|
|
Joined: Mar 2006
Posts: 193
Member
|
|
OP
Member
Joined: Mar 2006
Posts: 193 |
*67 does not work on a PRI.
Chris
|
|
|
|
|
Joined: Sep 2004
Posts: 4,196 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,196 Likes: 2 |
Look at the outbound ANI like eriway stated. Also, sometime the carrier has to allow you to override the outbound ANI.
|
|
|
|
|
Joined: Oct 2008
Posts: 49
Member
|
|
Member
Joined: Oct 2008
Posts: 49 |
Here in the netherlands when you have a digital phone on an ASPIRE you can program in 15-07 a functionkey with code 63 Called ID Restriction mode. this way you can restrict the caller id for external calls.
|
|
|
|
|
Joined: Jul 2009
Posts: 23
Member
|
|
Member
Joined: Jul 2009
Posts: 23 |
eriway is right... just make sure the carrier has the pri set for customer preference. If you put anything in 21-13 it will overide 21-12. Some number has to be sent so either the number from the station, the trunk or the carrier will send the BTN. You CANNOT put a number outside of the block assigned to that PRI anymore. Carriers will get fined for spoofing caller ID, part of the national no call registry
"If I can't fix it, I'll fix it so that no one else can"
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
The Simple Answer would be to Call your PRI Provider ant tell them to Make all your Line's to Output the Main Telephone Number.
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Jan 2005
Posts: 112
Member
|
|
Member
Joined: Jan 2005
Posts: 112 |
Be careful and let the customer know some business have no caller id/ blocked id refuse set on their lines and it can make it a pain to call their vendors for things.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
