|
|
Joined: Sep 2004
Posts: 4,126 Likes: 1
Member
|
OP
Member
Joined: Sep 2004
Posts: 4,126 Likes: 1 |
Guys what level software do you need to run a PRI on these system..it's been bleems since I have to look at one. Also, what does it use...NI-1, NI-2 or custom? Thanks.
|
|
|
|
|
Joined: Aug 2009
Posts: 32
Member
|
|
Member
Joined: Aug 2009
Posts: 32 |
Installing the 384i/704i T1/PRI Interface PCB (P/N 92190)
System Requirements:
T1/PRI Interface PCB, P/N 92190 or 92190A
System software: 384i software version 4.00.24 or higher or any version of 704i
T1/PRI PCB firmware 3.1 or later. If your T1/PRI PCB is P/N 92190A (series CL or 4.0), there is no
firmware upgrade required.
For DTMF receivers with such options as ANI/DNIS, a Tone Detector (CDTU A/B) PCB
It can use NI-1 or NI-2 but not custom. Just tell your dialtone provider you need NI-2 , that's what I always do. Hope this helps.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,126 Likes: 1
Member
|
|
OP
Member
Joined: Sep 2004
Posts: 4,126 Likes: 1 |
|
|
|
|
Forums84
Topics93,819
Posts636,734
Members49,641
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
206
guests, and
54
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
