|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Guys what level software do you need to run a PRI on these system..it's been bleems since I have to look at one. Also, what does it use...NI-1, NI-2 or custom? Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2009
Posts: 32
Member
|
|
Member
Joined: Aug 2009
Posts: 32 |
Installing the 384i/704i T1/PRI Interface PCB (P/N 92190)
System Requirements:
T1/PRI Interface PCB, P/N 92190 or 92190A
System software: 384i software version 4.00.24 or higher or any version of 704i
T1/PRI PCB firmware 3.1 or later. If your T1/PRI PCB is P/N 92190A (series CL or 4.0), there is no
firmware upgrade required.
For DTMF receivers with such options as ANI/DNIS, a Tone Detector (CDTU A/B) PCB
It can use NI-1 or NI-2 but not custom. Just tell your dialtone provider you need NI-2 , that's what I always do. Hope this helps.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
|
|
|
|
Forums84
Topics94,520
Posts639,992
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
158
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
