atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems 192 ipk single line ring with multiline

I have a customer with an elite 192ipk. They want
a multiline phone to ring on 2 particular lines and also have 2 single line phones on a sli board to ring at the same time. I haven't been able to get it to work. If i unplug the multiline phone, the cordless will ring. I am assuming because i have those lines ringing to the cordless phones also. any ideas. I have been working with the nec for a while now, and i still have trouble with the whole CAR/CAP thing. Any idea where i can get a good tutorial about the car/cap thing.

Any help would be greatly appreciated.

Are You using MB:4-01?

Hey Rickman! thanks for the quick reply. Yes, i did try MB: 4-01. Yes, but for some reason, if i have all 3 phones(2 analogs and 1 multiline) programmed to ring on that line and the multiline is plugged in, the analogs will not ring. If i unplug the multiline, the analogs will ring?????.
I am totally dumbfounded.
I don't see much for programming single line phones except in MB: 4-01 is that correct..By the way, i am currently doing this all via SAT.

Have You tried to set the Single Line phones to delay ring?

Have You tried to set the Single Line phones to delay ring?

Hey Rickman,

Yes, I just tried delay ring but made no difference.

Can i program the multiline and the analog with Cap and Car and assign the trunk to ring to the cap. and if so, how do i?

thanks for all you TIME and EFFORT and HELP.

Don't think you can Assign CAR or Caps on an anolog port.

In MB 04-12 you can assign SIE keys [an appearance of another extension or CAR key]
In MB 04-37 & 04-38 you can assign day & night ringing for the SIE key
It works on analog extensions as well as digital extensions

You will first need to program a CAR key/s MB 1-02-04 and DIT the line/s to the appropriate CAR key/s in day/night mode [MB 3-42 & 3-43]
Then you can assign SIE keys and ringing as needed