|
|
Joined: Aug 2011
Posts: 16
Member
|
OP
Member
Joined: Aug 2011
Posts: 16 |
Hello,
Recently aquired an NEC that came from a former tenant whose space we are moving into.
We have a new voice PRI from a new carrier and i'm attempting to turn it up. When going thru the programing i don't see any way to set it to ESF/B8ZS. We have a standard NI2 PRI the carrier doesn't see the D-Channel. The former tennant had a PRI so i thought it should be pretty much plug and play with a few possible adjustments.
Should have the version of switch and card model when i get in first thing monday. Is it possible that i could need addtional hardware or a license?
Thanks in advance..
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2008
Posts: 683
Member
|
|
Member
Joined: Feb 2008
Posts: 683 |
Been a while since I played with a PRI on an Aspire but it comes as ESF/B8ZS. There is no other option. Is ther a CSU/DSU in between that needs to be set? Do you have a T bird available to verify that you can call into the Aspire?
St Petersburg
|
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
Many of the new carriers put in a box that requires a T1 crossover connection between the IAD and the phone system.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,155 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,155 Likes: 2 |
When in doubt call a dealer in.
|
|
|
|
|
Joined: Aug 2011
Posts: 16
Member
|
|
OP
Member
Joined: Aug 2011
Posts: 16 |
Hello, All thanks for your replies. Glad to see an active board with people who know the topic..
it's coming off an Adtran IAD I have a X-Over. have a dealer coming tomorrow. But im moving into a new space this week and would rather get this pri turned up sooner rather then later. Also if i need parts want them ordered this morning.
Is there a way to status the channels? Seems like a lot of settings in the PRI form that I don't recognize.
Also is it possible that it wouldn't be able to route DID's - does that require a license?
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
Member
Joined: Aug 2005
Posts: 560 |
You need the PAL expansion chip on your processor card to run the PRI on the Aspire......
|
|
|
|
|
Joined: Aug 2011
Posts: 16
Member
|
|
OP
Member
Joined: Aug 2011
Posts: 16 |
OK well i have the PRI up. i can make outbound calls. But my DID's wont ring inbound..
I'll start another thread for that one thanks everyone.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,155 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,155 Likes: 2 |
BTW you do NOT need the upgraded PAL to use PRI anymore..only has to be at a certain software revision level..and of course within 64 ports with a base Aspire M.
|
|
|
|
Forums84
Topics93,966
Posts637,409
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
107
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from i2.photobucket.com]](http://i2.photobucket.com/albums/y24/donbaker/Phone%20Stuff/baker_telecommunications_inc_small-.jpg)
