web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#247909 10/13/11 10:38 AM
Joined: Jun 2010
Posts: 7
Member
OP Offline
Member
Joined: Jun 2010
Posts: 7
We inherited a NEC Elite 192 Phone system that was pulled from a working environment but has been sitting in a box for the past 9 months.

Don't know much about these systems, but this is what is in the box.

CPU Slot - CPUB800-U10
Slot 1 - COIB8-u30
Slot 2 - Empty
Slot 3 - ESI8-U10
Slot 4 - Empty
Slot 5 - Empty
Slot 6 - Empty
Slot 7 - Empty
Slot 8 - FMS(2) - U30

System seems to turn on and CPU Card has 1 solid LED and 1 Blinking LED. COIB and ESI cards have 1 blicking LED each. VM Card has several LEDs on.

Phone tech that came out today to hook up our lines to the phone said is wasn't working and he wasn't familiar with the NEC. He hooked up the 66-block and I've tried to check both Port 1 and Port 3 with a NEC DTP-32D Telephone attached to the first block and phone never lights up. we went down the blocks and still no go.

Not sure if the unit is completely dead or if there is a way to test the cards, any help would be great!

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jul 2005
Posts: 1,333
Member
*****
Offline
Member
*****
Joined: Jul 2005
Posts: 1,333
If it's been dead for 9 months the database may be corrupted due to the small green/ blue colored battery on the CPU card dieing.
I would unplug this battery when the system is off and repower it again. It should reload the system default. You will need to contact an NEC service company to do some reprogramming especially the voicemail ..


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Joined: Apr 2007
Posts: 1,439
Member
****
Offline
Member
****
Joined: Apr 2007
Posts: 1,439
Pretty sure there should NOT be a solid light on the CPU unless it's in the process of booting up.

** Warning ** This will default all of the previous programming in the PBX:

Turn the system off, remove the battery strap by pulling the small plastic plug towards you, then power the system up.

Sounds as though the CPU is locked up.

A decent NEC tech probably could have reprogrammed the entire system in less than an hour.


D

Joined: Nov 2008
Posts: 953
Member
Offline
Member
Joined: Nov 2008
Posts: 953
What Pins were you connectng your phone to?
COI=Line card,ESI=Station card, ESI is in Slot 3, Port one would be The (YL-OR) pair.
The Lights on the COI and ESI should be Flashing, Check the SW on the front of the VM card should be set to Run.
ô€€€ AMP1 is connected to S1, S2, and S3.
ô€€€ AMP2 is connected to S4, S5, and S6.
ô€€€ AMP3 is connected to S7 and S8.


"The Only Stupid Question, Is the Question Thats not Asked."
Joined: Oct 2011
Posts: 2
Member
Offline
Member
Joined: Oct 2011
Posts: 2
Sorry, I somehow tried to change my email address and wasn't able to login. Created a new account.

Dogart, according to the Hardware Manual, the LEDs are both in Normal Operation mode. I did remove the battery strap and still no luck.

Rickman, the amphenol cable is attached to AMP1. I was told pair 1-4 was for CO and that Digital starts at pair 9 - 16 and analog 17-20. So would pair 9 be the first station? I don't see a YL-OR pair on the block. Would it be Station Cable DTU or ETW. That's the only thing I haven't tried to switch yet. Been using DTU (Green/Red) on the jack but will try ETW (Black/Yellow) on Monday.

Joined: Oct 2011
Posts: 2
Member
Offline
Member
Joined: Oct 2011
Posts: 2
Just thought of this, will a DTP phone work with this system?

Joined: Dec 2008
Posts: 189
Member
Offline
Member
Joined: Dec 2008
Posts: 189
PM sent

Joined: Nov 2008
Posts: 953
Member
Offline
Member
Joined: Nov 2008
Posts: 953
Port 01 for the digital will be pair 17, there is no analog, you have a COI8 skip 8 pair, Blank slot skip 8, analog would require an SLI card, DTU Tip Ring, ETW is for The Older style phones that come from the EPII.


"The Only Stupid Question, Is the Question Thats not Asked."

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5