|
|
|
|
Joined: Jan 2012
Posts: 1
Member
|
|
Member
Joined: Jan 2012
Posts: 1 |
I'm having an issue with connecting to the webpro on the NEC Aspire Webpro. If I connect directly to the port (laptop to NEC) I am able to connect. If I run the cat5 to the Netgear switch, I get either very limited connectivity(intermittent) or no connectivity at all. Can anyone lend information on this?
This is a netgear gigabit switch. The switch is new. The cables have all been tested.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2008
Posts: 316
Member
|
|
Member
Joined: Feb 2008
Posts: 316 |
What kind of patch cords are you using? To connect from pc to phone system you use a cross over. Wired A on one end and wired B on the other. When using a switch you use a regular patch cord on the nec and computer. Did you check your IP's as well?
|
|
|
|
|
Joined: Sep 2004
Posts: 4,225 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,225 Likes: 2 |
Possibly a bad cord, bad port or an IP conflict on the network. It's definitely not the Aspire.
|
|
|
|
|
Joined: Aug 2006
Posts: 5
Member
|
|
Member
Joined: Aug 2006
Posts: 5 |
Hi, I had this problem previously and it was on here that I found the answer link Netgear SmartSwitch has built in Voice VLAN setup. Click on Switching -> Voice VLan and set to disable. Hope this work for you too. Regards M
|
|
|
|
Forums84
Topics94,549
Posts640,094
Members49,860
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
152
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
