|
|
|
|
Joined: Feb 2012
Posts: 14
Member
|
|
Member
Joined: Feb 2012
Posts: 14 |
Does anyone remember how to work on the AP00?
I have a NEAX 2000 site where the AP00 was sending smdr and pms for over 10 years. Customer changed pms servers and it has never worked since. I have installed a new ap00 card and reprogrammed multiple times. I can ger smdr but no pms?
Help!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2006
Posts: 123
Member
|
|
Member
Joined: Dec 2006
Posts: 123 |
I thought no PMS would be a good thing..... :shrug:
............................. sorry I could not resist.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
You need to get a serial tap or sniffer to determine what is not working. Since the sever was changed I would start there and work my way to the phone system.
|
|
|
|
|
Joined: Feb 2005
Posts: 598 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 598 Likes: 4 |
have you got a simulator?
PM me as there is one accessible on the net but I'm not sure it should be so I don't want to post the address on an open page!
|
|
|
|
|
Joined: Feb 2005
Posts: 598 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 598 Likes: 4 |
|
|
|
|
|
Joined: Feb 2012
Posts: 14
Member
|
|
Member
Joined: Feb 2012
Posts: 14 |
I do have a simulator. I changed out the AP00 card and played around with the ports and baud and for about 2 days I had PMS data talking to the software but they were telling me it was garbage. I changed to 1400 format reset the card and I have not been able to make it send anything since. I have blown out the card and reprogrammed a couple of times... I don't get it.
|
|
|
|
|
Joined: Feb 2005
Posts: 598 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 598 Likes: 4 |
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
"They were telling me it was garbage..."
Um, I'd hook up on Hyperterminal and look at the data. If the data is sensible data (i.e starts ^J then has numbers and spaces, then ends ^M^J^L) then the PMS folks are full of it. If it's truly illegible data, I'd adjust baud and parity until you get valid data.
Make sure that the new server's baud and parity is set correctly on the server's ports; it must match the baud and parity that you are sending from the PMS. You can sample with a laptop at any point.
|
|
|
|
|
Joined: Feb 2012
Posts: 14
Member
|
|
Member
Joined: Feb 2012
Posts: 14 |
OK so finally got PMS link fully functional for everything bu Guest Name. Confirmed that PMS is sending name and 2000 is confirming and sending name back to PMS.
Checked all settings and all are correct, then i think to see if there is any name display from digital set to digital set from command 770.
Nothing!!
Check 08, 255 its turned on?
I have no clue....help!
|
|
|
|
|
Joined: Feb 2012
Posts: 14
Member
|
|
Member
Joined: Feb 2012
Posts: 14 |
I have tried changing 08-255 on then off, reset switch, changes set name in 770. No matter what I only get ext #.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
162
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
