|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
OP
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
I installed a "refurbed " SLI 8 ETU today in a Electra elite
I set the slot card type as a SLI , all I get on all 8 ports is talk battery no ICM dial tone
I don't think there is any other programming involved
I'm thinking its a bad card
am I missing anything ?
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Did you poke it in the eye? Reset?
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
OP
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
I did a power up and down reset, I was just looking at the manual should I do the "Second Initialization"?
I saw that in the flow chart but I misread the manual while on site I thought it said I wold lose all data , rereading it looks like the data stays intact
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
A reset is all it should take. I would guess a bad card.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,503 Likes: 2
Member
|
|
Member
Joined: Apr 2005
Posts: 2,503 Likes: 2 |
Skipp,
Are you adding the card or replacing one?
If you are adding, what is your port count?
Are there extension numbers assign to the ports?
I might be wrong but something tells me if the analog port has no extension number assigned you won't get dial tone.
We get old too soon, smart too late
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Yes, must assign extension numbers in 4-10.
|
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
Originally posted by DrPbx:
Yes, must assign extension numbers in 4-10. Pretty sure you will NOT get dialtone on the new ports until you do 4-10 D
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
OP
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
Its a new card being added for a single SLT I'll give 4-10 a try , thanks Guys
:thumb:
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Also, you didn't specify B2-48 or 192, IPK, IPKII.
The B2-48 supports a max of 48 ports, of which 32 max can be phones and 16 max can be CO lines. this can be doubled with a second cabinet.
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
OP
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
162
guests, and
272
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
