|
|
|
|
Joined: Nov 2007
Posts: 492
Member
|
|
Member
Joined: Nov 2007
Posts: 492 |
This is my second Cisco AP1142n install. The first one installed perfectly. I"m working on the second install.
The IP has been assigned via DHCP and I know the IP address of the unit. I used the MAC address to verify.
1. I cannot connect to it using the web GUI. From what I have read the image out of the box must be WLAPP and I need it to be Autonamous. Is this correct?
2. Also apparently you have to be a BP to get the Autonamous IOS image. Is this correct?
Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 352
Member
|
|
Member
Joined: Mar 2007
Posts: 352 |
I have installed Cisco PA's but were were controlled by Cisco AP controllers. Have you tried some of the Cisco forums to get a response to this question? I also found the configuration guide. Take a look and see if it has the answer for you. https://www.cisco.com/en/US/docs/wi...A1/configuration/guide/scg12421aJA1.html
|
|
|
|
|
Joined: Nov 2007
Posts: 492
Member
|
|
Member
Joined: Nov 2007
Posts: 492 |
My hunch was correct. The AP had the wrong IOS image. I returned it for an autonamous AP.
Thanks!
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
157
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
