|
|
|
|
Joined: Jan 2009
Posts: 1
Member
|
OP
Member
Joined: Jan 2009
Posts: 1 |
Hello all, I am fairly new to the telcom side of things as my background is computer networking. I have started installing VOIP phone systems (Interactive Intelligence) and have an issue with our system.
Ok we are trying to go live with our I3 system CIC 3.0 SU4 and an Audiocodes Mediant 1000. Our carrier is Time Warner. When we tried to go live the other day we could recieve incoming calls just fine. However we could not make outbound calls. I verified the dial plan was correct and that the call was hitting the mediant with I3 support. So I got TW involved and they told me they were rejecting the calls because we are not sending/using q.931 ISDN numbering plan. I have researched this and only found information on q.931 protocol which is not what TW was refering to. So does anyone know how to configure q.931 ISDN numbering plan on an Audiocodes Mediant 1000? The error in the IC client is:
Disconnected [No Circuit Available:Request Facility Not Subscribed (ISDN Cause Code 50)/503:SIP - Service Unavailable]
Our current NEC system does have this ISDN numbering plan but I can't find it in the Audiocodes.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 31
Member
|
|
Member
Joined: Mar 2007
Posts: 31 |
This usually means you have requested use of capabilities that you are not authorized to use.
Check your PRI configuration for 'switch-type' or numbering plan, and make sure those are set correctly.
let us know what happens then.
--
Only the fool fears asking a question.
|
|
|
|
|
Joined: Aug 2008
Posts: 121
Member
|
|
Member
Joined: Aug 2008
Posts: 121 |
It is possible -- I've just had this problem with a PRI to Airespring -- that what they guy *really* meant is "you aren't sending valid CNID -- something with a number we assigned you"; this is commonly caused by not setting a CNID at all, which causes some gear (like my Asterisk boxen) to send 0000000000...
which causes telcos to feel maladjusted.
You're correct; q.931 is the ISDN/ISUP protocol. The numbering plan stuff is in e.164.
|
|
|
|
|
Joined: Jun 2007
Posts: 2,106
Member
|
|
Member
Joined: Jun 2007
Posts: 2,106 |
You could also not be dialing in a format they want. Some expect 10-digit dialing, some +1... Some will allow 7-digit local dialing... Best to see what you are sending your audiocodes and ask them what they are expecting.
|
|
|
|
Forums84
Topics94,293
Posts638,827
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
125
guests, and
171
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
