web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#262863 05/18/04 06:08 AM
Joined: May 2004
Posts: 1
Member
OP Offline
Member
Joined: May 2004
Posts: 1
I have a at&t spirit phone system in my shop
and the other day the touch pad Quit working and now it just like a rotary phonePlease help.I have a controller system# CS308A1.
Contact David Tribble 770926-5883
Thanks

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#262864 05/18/04 06:26 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Is it a 616 or 1224? You will need to go into Admin and look at the Dial Type for the lines.


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#262865 05/18/04 07:07 AM
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
*****
Offline
RIP Admin-Founder
*****
Joined: Jun 2001
Posts: 10,631
>>I have a controller system# CS308A1.
Thats a 308 controller dtmf


SPIRIT CS administration may be carried out from either a 6-button or a 24-button set.
Three important steps are required for entering the administration mode:
1.The control unit ADMIN switch must be ON.

2.The administration overlay must be in place on station 10.

3.The set must be plugged into control unit jack 10 (call processing is interrupted only
at station 10).


DIAL TYPE
Press FEATURE. Dial 7.
Each line indicator light will show the current dialing type for that line. If the light is OFF,
that line is set for touch tone dialing. If the light is ON, the line is set for dial pulse
dialing. To change the dialing type for a line or lines, press the line button(s) and dial the
appropriate digit from the table below. YOU may press more than one line button to make
the change on more than one line. If you enter a digit without first pressing a line button
you will hear the error tone.
DIAL INDICATOR LIGHT SETTING
1 OFF Touch Tone
2 ON Dial Pulse (installed)

added:
You now have it in pulse what you want is tone. If I read your post correct.
let us know if it works?

[This message has been edited by test-ok (edited May 18, 2004).]

#262866 05/18/04 07:09 AM
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
*****
Offline
RIP Admin-Founder
*****
Joined: Jun 2001
Posts: 10,631
oh and then turn the admin switch back off. [Linked Image from sundance-communications.com]

#262867 05/18/04 07:14 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Duh, I guess if I would have looked at the # I would have figured that out.


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#262868 05/18/04 07:25 AM
Joined: May 2003
Posts: 1,362
Member
*****
Offline
Member
*****
Joined: May 2003
Posts: 1,362
You may need a couple more steps after moving the admin switch, and before dialing Ftr 7


1.From station 10 press intercom
2.Press speaker
3.Dial *0
4.Dial 1
5.Then Press Ftr 7

****Step 4. is where you need to be careful if you enter a "0" there instead of a "1", it will default the system if it is not defaulted already.

[This message has been edited by JOHNYREB (edited May 18, 2004).]

#262869 05/18/04 07:41 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Sounds like it already defaulted bieng that it went back to pulse. I can fax you the Program page and the overlay if you would like, they are not hard to program at all.

[This message has been edited by dtmf (edited May 18, 2004).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#262870 05/18/04 07:49 AM
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
*****
Offline
RIP Admin-Founder
*****
Joined: Jun 2001
Posts: 10,631
you can also call that dtmf and he can explain it too. click on his profiles (the little man with a ? mark) [Linked Image from sundance-communications.com]

Joined: Jul 2008
Posts: 63
Member
Offline
Member
Joined: Jul 2008
Posts: 63
I had to switch out a spirit KSU its a 308 with a 308 expansion, all works fine but it pulse dials not tone. I slide the admin switch to admin then hit the intercom then speaker then *0 hear 2/3 beeps then hit feature and got error tone, hit 7 got error tone try hitting line 1 and error slide the admin switch back and still pulse dials help what did I do wrong
Neil

Joined: Aug 2004
Posts: 9,155
Likes: 16
Admin
*****
Offline
Admin
*****
Joined: Aug 2004
Posts: 9,155
Likes: 16
Probably tagging on to a 10 year old thread for starters. smile Best to start a new topic as many don't follow old threads plus it helps with search results.


[Linked Image]
Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,694
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,704 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
teleco 4
Who's Online Now
0 members (), 113 guests, and 244 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5