|
|
|
|
Joined: Dec 2002
Posts: 341
Member
|
OP
Member
Joined: Dec 2002
Posts: 341 |
I have an older Baystack 303 that I'd like to install for my home network. Previous owner (unknown) set a password that I don't know. Is there any way to default this switch so I can get into administration/setup? I've been over the web and can't find anything.
Thanks,
Bill
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
Within the first 60 seconds after booting the switch, type the
following: "tEmpEst_sAvEr". The switch will then prompt user to enter
a new password.
try that
|
|
|
|
|
Joined: Dec 2002
Posts: 341
Member
|
|
OP
Member
Joined: Dec 2002
Posts: 341 |
Zane, I found that on the web, but it's not appearing to work. I have Hyperterm (all parameters verified) set to local echo on, but when I try to type "tEmpEst_sAvEr" at boot-up, the text display lags dramatically and doesnt' (seem) to do anything. Any other suggestions?
Bill
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
Have you tried a null modem? Its a pretty old switch. Not a lot of info on it as you know. I think I know someone who has one, so I might try to borrow it. What are you trying to do?
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
102
guests, and
345
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
