|
|
Joined: Apr 2004
Posts: 5
Member
|
OP
Member
Joined: Apr 2004
Posts: 5 |
I have been locked out of the programming station on the Comdial KSU and need to reset it back to the Factory Defaults
|
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
What Comdial KSU are you speaking of?
|
|
|
|
|
Joined: Apr 2004
Posts: 5
Member
|
|
OP
Member
Joined: Apr 2004
Posts: 5 |
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
What do you mean locked out? You can use 10 or 12 on that system to program, have you tried both?
|
|
|
|
|
Joined: Apr 2004
Posts: 5
Member
|
|
OP
Member
Joined: Apr 2004
Posts: 5 |
Yes we are locked out of both due to student programming
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I've never heard of such a thing, only thing that comes to mind is if someone did a Physical, logical port relocation on the programing stations. I would try to get in from every station right at the 66 block. If that fails pull the battery or capasitor that holds up the system memory, then replace it and boot back to the default settings. Did you try to access through the com port? That should work no matter what they did, unless they changed the password.
mark
[This message has been edited by markk (edited April 01, 2004).]
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
I to have never heard of such a thing, they have done a set relocation, but i would guess that if you try the phones you will find two that will let you in.
|
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
get on a phone and dial 0...see what phone it goes to..That phone should let you in. Don't let the students work on it unless supervised. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/biggrin.gif)
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
O-yea when you find your programming ports take your LCD with you to program with.
|
|
|
|
|
Joined: Apr 2004
Posts: 5
Member
|
|
OP
Member
Joined: Apr 2004
Posts: 5 |
Markk Removing the CAPS worked but watch out for the NEC 5.5v 1 f Cap it holds the charge for a long time
|
|
|
|
Forums84
Topics93,879
Posts636,998
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
20
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
