|
Joined: Jul 2004
Posts: 23
Member
|
OP
Member
Joined: Jul 2004
Posts: 23 |
I am trying to hyperterminal my Comdila dsu I but I get alot of garbage or the lap[top locks up. I have a rj-11 two pair cable connected to a db-9 connected to my laptop. I have my settings according to my manual (9600 8-N-1). I am trying to find out what version the software is on trhe dsu because I still ahve problems with lamp light indicators working with my Debut VM.
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
If you are seeing garbage you're communicating with the cabinet but your settings are wrong! If you have a DSU, enter system programming. Dial 15, dial 1, dial 08, dial 11, dial ** then speaker off. If you have a DSUII, enter system programming. Dial 15, dial 1, dial 08, dial 11, dial ** then speaker off. In both cases you now have set com 1 to 9600 8-N-1. Program from ext-10 or 12.
|
|
|
|
Joined: Jul 2004
Posts: 23
Member
|
OP
Member
Joined: Jul 2004
Posts: 23 |
Yes I did that but I still get locked up in hyperterminal. I think it might be in the pinout of the db-9? but not sure. <font face="Verdana, Arial" size="2">Originally posted by jwooten: If you are seeing garbage you're communicating with the cabinet but your settings are wrong! If you have a DSU, enter system programming. Dial 15, dial 1, dial 08, dial 11, dial ** then speaker off. If you have a DSUII, enter system programming. Dial 15, dial 1, dial 08, dial 11, dial ** then speaker off. In both cases you now have set com 1 to 9600 8-N-1. Program from ext-10 or 12. </font>
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
It does not sound like a pinout issue. Open your db-9 and make sure all non-connected wires are taped or cut off.
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
81
guests, and
25
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|