sundance-communications.com/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems FX-II 17D

I have a stuck port. I cannot get to port 26 to change it to 277. The auto station relocation was on and they moved phones around while I was in with VMMI. The x277 says offline when called, but says port 26 x 277 when pressing speaker. When I type in 277 in the items field, it goes to port 78.
I know this by going to browse and port 78 is on the left. We have reset, powered down, and turned auto station relocation off and unplugged the phone. I have a current saved database if someone wants to look at it.
Also, I have defaulted both ports.

E-mail the database file and I'll look it over to see and load it on a system here in my shop to confirm the results

Sent it over. Did you get it?

I have seen this a couple of times. Punch down shoould be able to resolve this for you. Let me know if not, I will give it a try.

------------------

Thanks...

Punchdown...When did you get out of jail??? LMAO

That explains the funny walk!!

------------------


[This message has been edited by BIGDOG3c (edited January 07, 2005).]

Well Dopie(Rather be fishing)I have ten good girls I take care of. They all joined forces for a weekend down on Harry Hines and made enough money to bail me out !! When ya coming to Big D for some fun??

Chazrc - I got the DBR and will play with it on Sunday. I'm moving a customer today.

Okay you don't have a stuck port, but a corrupted database. This probably did occur as you suspect because port 1 and 26 are the two ports tied up and corrupted. I'm playing with the DBR and trying to figure out how to correct without having to program from scratch (which would be long and tedious). In the mean time port 78 isn't being used and try using it for now.

[This message has been edited by Punch Down (edited January 10, 2005).]

I gave them new extensions for now. The port 78 used to be x 277, before the mishap wth the auto station relocation.