|
|
|
|
Joined: Jan 2005
Posts: 1
Member
|
OP
Member
Joined: Jan 2005
Posts: 1 |
I am attempting to use an external modem to program the Corprate Office DX through com port 2. After succesfully connecting when I disconnect the DX board starts beeping and I can't reconnect until I reboot the system or disconnect and reconnect the cable. I am think that I need to jumper something on the cable to keep a signal present or eliminate a signal?
Thanks;
Peter
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
It sounds as though you are shutting down the VM program when you exit. When your done programming, returm to "display line status" screen and just x out of key link, then disconnect. If you use "exit this program", you shut off the VM software.
Mark
[This message has been edited by markk (edited January 26, 2005).]
|
|
|
|
Forums84
Topics94,283
Posts638,765
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (dans),
183
guests, and
143
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
