web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#32041 05/19/05 03:45 AM
Joined: May 2005
Posts: 3
duzzy70 Offline OP
Member
OP Offline
Member
Joined: May 2005
Posts: 3
I am working on a GTE Executech 6x16 with 6414 sets (some 6414L, some 6414AB). A few sets were old and I replace them. On the old phones, the caller could hit 'INTC', dail the 2-digit intercom #, and be on the speaker of the called phone. After replacing the sets, when intercom calling using the same procedure, the call just rings on the called set until someone physically picks up the call. I've tried 'INTC # 2' and it still does not work. Some co workers seem to think there is a phone compatability issue; the new phones, while the p/n is the same, it isnt the same. Is this true? How do I rectify this?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#32042 05/19/05 03:56 AM
Joined: Oct 2001
Posts: 6,160
Member
Offline
Member
Joined: Oct 2001
Posts: 6,160
It might be the way you are dialing. You can only be handsfree at one end. If you initiate the call with the handset, you will voice announce, if initiate the call handsfree, it will ring the other phone.
mark


------------------
Reliable Telephone Service

#32043 05/19/05 10:15 AM
Joined: May 2005
Posts: 3
duzzy70 Offline OP
Member
OP Offline
Member
Joined: May 2005
Posts: 3
Mark,
Our supplier of these refurbed sets has 3 different models: AB, L-AB, & S. Do I need to have an 'S' (speaker?) model for this to work? I don't know if these designations are legitimate ones or what they mean. Thanks,
Greg
Quote
<font face="Verdana, Arial" size="2">Originally posted by markk:
It might be the way you are dialing. You can only be handsfree at one end. If you initiate the call with the handset, you will voice announce, if initiate the call handsfree, it will ring the other phone.
mark


</font>

#32044 05/19/05 11:39 AM
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
Offline
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268
duzzy:

It can get confusing---but I think this is the way it goes--
6414-AB 8 line standard
6414-BB 8-line Standard
6414-L BLF phone
6414-S Speakerphone

You're going to want the 6414-S
Good Luck

#32045 05/19/05 12:53 PM
Joined: Oct 2001
Posts: 6,160
Member
Offline
Member
Joined: Oct 2001
Posts: 6,160
yes the AB is ash black and BB basic black
the only letters that mean anything are the L for busy lamp field and the s for speakerphone. To be handsfree at both ends requires a speakerphone to initiate the call.
mark


------------------
Reliable Telephone Service

#32046 05/20/05 02:54 AM
Joined: May 2003
Posts: 2,267
Member
Offline
Member
Joined: May 2003
Posts: 2,267
If I remember right, on most of the early Executech I systems, you could only have 1 "L" set installed.
There is also a 6414-PG (pearl gray). It came in Monitor, BLF, and Speakerphone versions. You may also have the color code FB, for flat black, which was the exact same color as BB.

------------------
Comdial Telephone Repair
Toshiba Telephone Repair

[This message has been edited by paul144 (edited May 20, 2005).]

#32047 05/20/05 03:34 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
You can actually have 8 BLF sets on the 616B and 616x, just remember they use the paired port as well so you wouldn't hook anything up to it.


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#32048 05/20/05 04:45 AM
Joined: May 2003
Posts: 2,267
Member
Offline
Member
Joined: May 2003
Posts: 2,267
Thanx for the correction! So, each BLF ties up two ports? Was it the 308 that could only use one BLF? I need to stop relying on my memory for these things.....

#32049 05/20/05 07:39 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Nope, you can put 4 on the 308. Hang in there Paul it will get better. [Linked Image from sundance-communications.com]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5