FXII Paging across the span through the phones|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Page 1 of 2

FXII Paging across the span through the phones #32517 08/01/05 05:52 AM
Joined: Aug 2005 Posts: 16 Austin,TX, USA dhp OP Member
OP dhp Member Joined: Aug 2005 Posts: 16 Austin,TX, USA	Trying to set up phone paging across the span of a Networked FXII connected with a pt. to pt. T-1. Have the CO cards that were suggested but found that paging was not for internal use but for external paging. Any ideas or suggestions would be greatly appreciated.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: FXII Paging across the span through the phones #32518 08/01/05 06:23 PM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco
5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	Comdial had a bulletin on this. I'll see if I can find it. Otherwise, try and search for it on the CCC. Look for FX000009a(1) under FAQ/Tech Tips for FXII. "Network paging (VMMI 180 & later)." ------------------ \| Signal Communication Systems - Fresno, CA \| \| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA [This message has been edited by 5years&counting (edited August 01, 2005).]

Re: FXII Paging across the span through the phones #32519 08/02/05 12:47 AM
Joined: Aug 2005 Posts: 16 Austin,TX, USA dhp OP Member
OP dhp Member Joined: Aug 2005 Posts: 16 Austin,TX, USA	Yeah, we saw those and purchased the co cards to make it work. Come to find out it is more for an overhead paging to a paging system and not paging through the phones. We tried to set up a co key but it just turned red and didn't ring the phone or announce over it. Thanks though!

Re: FXII Paging across the span through the phones #32520 08/02/05 03:30 AM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco
5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	What about tying an IST port to a C.O. Port and using DISA? Then you call the IST extension, access DISA dial tone, dial your codes, and page over the phones. ------------------ \| Signal Communication Systems - Fresno, CA \| \| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA

Re: FXII Paging across the span through the phones #32521 08/02/05 10:51 AM
Joined: Aug 2005 Posts: 16 Austin,TX, USA dhp OP Member
OP dhp Member Joined: Aug 2005 Posts: 16 Austin,TX, USA	We'll give it a shot, Thanks a LOT!

Re: FXII Paging across the span through the phones #32522 08/02/05 02:26 PM
Joined: Sep 2004 Posts: 86 Clarksville, TN, USA Dlr920 Member
Dlr920 Member Joined: Sep 2004 Posts: 86 Clarksville, TN, USA	If all you want to do is page at one site at a time you can pump the ist dial tone into the co port, and build route tables to reach that specific line port at each node. When you hit the co port you will have intercom dial tone and all you need to do is dial 70 for an all call.

Re: FXII Paging across the span through the phones #32523 08/02/05 02:27 PM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco
5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	Even better idea! ------------------ \| Signal Communication Systems - Fresno, CA \| \| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA

Re: FXII Paging across the span through the phones #32524 08/02/05 04:39 PM
Joined: Aug 2005 Posts: 16 Austin,TX, USA dhp OP Member
OP dhp Member Joined: Aug 2005 Posts: 16 Austin,TX, USA	Cool, they want to be able to page from either site to the other, I am sure though that they will ask about an all page but if we can set this up for now, that will be awesome. Ya'll have been a HUGE help. Will try these solutions this week. Thanks again!

Re: FXII Paging across the span through the phones #32525 08/03/05 09:50 AM
Joined: Apr 2004 Posts: 731 Columbus, Ohio BIGDOG3c Member
BIGDOG3c Member Joined: Apr 2004 Posts: 731 Columbus, Ohio	Quote <font face="Verdana, Arial" size="2">Originally posted by Dlr920: If all you want to do is page at one site at a time you can pump the ist dial tone into the co port, and build route tables to reach that specific line port at each node. When you hit the co port you will have intercom dial tone and all you need to do is dial 70 for an all call.</font> This will work, but you may run into a disconnect issue. Comdial does not send any type of disconnect to the co port. You may find the port is locked up due to it not getting a disconnect signal. ------------------ BIGDOG3c PARALLEL TECHNOLOGIES INC. WWW.ABUGSEYEVIEW.COM BIGDOG3c PARALLEL TECHNOLOGIES INC. BIGDOG3c.COM (Amateur Photographer)

Re: FXII Paging across the span through the phones #32526 08/09/05 03:25 AM
Joined: Aug 2005 Posts: 16 Austin,TX, USA dhp OP Member
OP dhp Member Joined: Aug 2005 Posts: 16 Austin,TX, USA	We tried this, from the node we dial 9 then 1187, on the node and hub we have the CO ports set for Aux. At the Hub end we tied a single line port (ext. 5570) to the CO port. On the Node side when we do the paging, we can hear the single line intercom dial tone. Tried to dial 70 but it didn't do anything. But, if we dial a cell phone number it will dial out. Any thoughts?

Page 1 of 2

Moderated by 5years&counting, jwooten, RATHER BE FISHING

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems FXII Paging across the span through the phones