|
|
Joined: Aug 2003
Posts: 1,573
Member
|
Member
Joined: Aug 2003
Posts: 1,573 |
I picked up a bid for a senior citizen complex here in Baltimore, it called for 12 strand fiber between buildings to the telco room.....no problem!!!!
BUT the bid mentioned nothing about putting the fiber in a interduct or I called them orange gizmos: buffer tubes.......
Is a buffer tube ALWAYS required to be used with fiber?????
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
Mitch,
interduct is the correct word. Buffer tube is the jacket surrounding the fiber. The main reason for installing interduct is so it sends a clear signal to everyone not to mess with it. It also provides a level of protection for the fiber cable itself, which is good, unless you plan on running armored sheathed cable. Interduct is normally not used when running fiber through conduit from point to point or for direct burial.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
No. If they didn't spec interduct then why give it away for free? It's very expensive. Besides, indoor/outdoor can be run and has a good protective sheath. I would however suggest you offer it as an extra expense..your call.
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
|
Most Online5,661 May 23rd, 2018
|
|
1 members (MooreTel),
364
guests, and
54
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|