sundance-communications.com/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems ATI-X

I just got a couple of ATI-X's for my Executech i got them to work with the system ok but I wanted to know if anyone could tell my what the 2 pin conector thats labled "opt" is used for?

Also would anyone know what the integration digets are for voicemail interfacing with the executech system's? I'am am fooling around with asterisk as a V-mail box

Thanks!

Please read this thread
https://www.sundance-communications.com/forum/ultimatebb.php?/ubb/get_topic/f/2/t/001111.html

and then complete your profile.

Welcome to the board.
It's an understatement to say that it is difficult to integrate an executech with a voicemail system. It's an old system, while you might get it to work a little, you won't get true integration.
Mark

You're working with two extremes here. Executech (80's technology and analog) and asterik (2006 voip soft switch).

Thanks for the welcome!! I'am not really looking for a full integration and this is not for the mission critical use. I got this from my employer just before the dumpster did and installed it in my home about a year ago. all we really use it for is a glorified intercom and access to our regular pots line and a VOIP line. I also have 6 OPX's to show off my Antiuqe Bell system phones and other stuff.
The system is a Executech K2296
Thanks

I may have two of these in stock, two ports each, still new in the box. I will check on Monday and let you know because if I recall correctly, they come with an installation instruction sheet and there's not much to it. Then again, they really don't do much anyway except provide dial tone.

2296 = no VM ID at all.
Executech 2000 would have in the later Revisions.