sundance-communications.com/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems DSU II system with Comdial impact LCD phone without ring sound

Thanks. I will try to hook up a music source so far.

Hi
I already set the mail box from "blind" to "wait for answer" type. However, it still do not work. Does everyone have another ideas? Thanks.

Leo

Leo,
Read through the posts above. The early DSUII does not provide ringback. Use your MOH or check on a software upgrade with your equipment provider.

Thanks. Sorry for not pay attention about that.
Anyone has some suggestion for MOH device?
What model fit the DSU II and need what kind of cable/connector? Where to buy and the price? Thanks again.

Leo

The connection into the DSU should be an RCA connection.

As for device, you could use anything from an AM/FM radio, cd player (mini boom boxes work much better than the personal "disc-man" cd players), or you could purchase an on-hold player that can play information on hold. I would start with something simple, so you can first see if it's going to work. The cable you need will be RCA male to whatever connection your music source takes.

Thanks a lot. That will help.

Leo

Hi,
I am looking at Bogen CR100A music source now. Does it fit into DSU II phone system? It state that it provides economical source of background music for a page sound system. Is it also for my phone system? Thanks.

Leo

The Bogen CR100A will work fine; though it's a pretty fancy tuner/player for just a simple MOH source. Just remember to adjust the volume on unit by calling into the system and then placing a call on hold and then listen through the phone. Each system manufacturer has slightly different impedance on the music input. You'll need an RCA cable with two male ends; this is the same kind of connector you see on the old three color A/V cables you find behind VCRs and the like. Good luck.

Thanks a lot. I am happy that I got what I need throuht your all hard work.

Leo