|
|
Joined: Jan 2007
Posts: 17
Member
|
OP
Member
Joined: Jan 2007
Posts: 17 |
Does anybody know what this means? A message says call 7
I have done this and nothing happens
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 512
Member
|
|
Member
Joined: Jun 2006
Posts: 512 |
Not sure which comdial system you have,but station to station mess. would light and flutter at itcm button. Itcm,#7,and ext. to cancel. This usually was set by accident on older systems.
|
|
|
|
|
Joined: Jan 2007
Posts: 17
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 17 |
Do you know how to determine which extension set it?
|
|
|
|
|
Joined: Mar 2005
Posts: 125
Member
|
|
Member
Joined: Mar 2005
Posts: 125 |
Fluttering Red Intercom light = auto redial is in use, or system is in night mode (at station 10 or 12, depending on the system setup)
Winking Red Intercom light = an LCD message is set on your telephone for others to recieve when calling.
On the other hand, the HOLD button flashing red indicates there is a message to pick up. This could be from a voice mail system, or can be sent from another phone. In your case, station 7. Who (or what) is station 7? From what you are describing in the body of the question, I'm wondering if the hold button lamp is the one flashing, not the intercom button lamp.
A fluttering red hold button lamp inditates automatic station relocation has been set.
Which lamp is flashing? Intercom or Hold?
It would be helpful for you to tell us what system you have and the type of phones as well.
The man who sets out to carry a cat by its tail learns something that will always be useful and which never will grow dim or doubtful. - Mark Twain
|
|
|
|
|
Joined: Mar 2005
Posts: 125
Member
|
|
Member
Joined: Mar 2005
Posts: 125 |
Originally posted by jpogriff:
Do you know how to determine which extension set it? According to what you said, extension 7 set the light. Do you have a voicemail system? If not, go to extension 7 and dial #3X to turn off the light. X is the station number that has the lamp flashing.
The man who sets out to carry a cat by its tail learns something that will always be useful and which never will grow dim or doubtful. - Mark Twain
|
|
|
|
|
Joined: Jan 2007
Posts: 17
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 17 |
This is the ITCM button. It is Comdial Impression DSUII with vmail. Thanks for the help.
|
|
|
|
|
Joined: Jun 2006
Posts: 512
Member
|
|
Member
Joined: Jun 2006
Posts: 512 |
Try: pickup handset at phone with blinking itcm and press itcm and hold button this should connect you with ext. that called,then hang up. This worked on version before impression.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
How is there an extension 7? Is the extension NAMED "7"?
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
That's what I was thinking!  Page 98 of the attendant user guide. You have night ring activated. If you need a pdf copy of the guide send me an email. Mark
|
|
|
|
|
Joined: Jan 2007
Posts: 17
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 17 |
An lcd message!!!! Driving me crazy.. Thanks for the help.
The message was set:
ictm *02
2
"7" keyed by uesr
The the screen will say call "7"... And ictm will flash.
1. PRESS INTERCOM.
2. DIAL *02.
3. DIAL the desired number from your message list. The default messages
of “Back At†and “Call†may be used:• For default message 1, which is “Back At,†dial time in twelve-hour format using the # as a colon.• For default message 2, which is “Call,†dial the telephone number of where you will be.4. PRESS SPEAKER to end message. Intercom light flashes steadily.
To turn off message and your intercom light,1. PRESS INTERCOM.2. DIAL #02.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, jeffmoss26),
173
guests, and
420
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
