|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
|
Member
Joined: Dec 2006
Posts: 7 |
I'm working through a DXP training manual that recommends testing the system before going to the install site. It says to plug each station into a station port and then plug a digital armiger into the board and test each port on the board with a telephone that you know is operable.
What is a digital armiger? I've checked internet supply houses and can't find any reference to such a device?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
It is a device that breaks out the connector on the card to 6 pin modular jacks so you can plug the phones directly in.
You can make your own by crimping mod ends on to an old cable. I wouldn't waste my time with all that testing.
|
|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
|
Member
Joined: Dec 2006
Posts: 7 |
Thanks, we don't do pre-install testing either. It's a training manual so ya have to give em the answer they want. :thumb:
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
21
guests, and
53
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
