|
|
Joined: Aug 2007
Posts: 7
Member
|
OP
Member
Joined: Aug 2007
Posts: 7 |
Hello,
I have Comdial FXII with two T1/PRI cards. I am trying to connect one T1 card (from PBX) to Cisco 3725 that has NH-HDV and t1 card. I am using twister pair cable. Neither Cisco and FxII doesn't recognize the connection. t1 card in Cisco is yellow light. Comdial t1 card is in red light. It looks Cisco and Comdial doesn't see each other. However, if I plug a service provider to Comdial, light is green. If I plug a service provider to Cisco it is green also.
What am I doing wrong? Egor
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
I would say you'll need a crossover. Also, you'll need someone well versed in cisco!
|
|
|
|
Joined: Aug 2004
Posts: 9,155 Likes: 16
Admin
|
Admin
Joined: Aug 2004
Posts: 9,155 Likes: 16 |
Make sure the Cisco is a T1 card and not a PRI. Every tie I have done to Call Manager was a PRI hookup and required a different card in the FXII and the Call Mangler. Look at the synch/signal light on the FX card.. It'll tell you if the cable is correct.
|
|
|
|
Joined: Jun 2007
Posts: 356
Member
|
Member
Joined: Jun 2007
Posts: 356 |
swap the orange and green pairs for a x-over cable OR go through a switch with the two connections.
it's all tip and ring
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Originally posted by Frank_DaFoneguy: swap the orange and green pairs for a x-over cable OR go through a switch with the two connections. If you wanted to do x-over for ethernet yes. In this case we need 1-2 4-5.
|
|
|
|
Joined: Aug 2007
Posts: 7
Member
|
OP
Member
Joined: Aug 2007
Posts: 7 |
Thank you for reply. 1-2 to 4-5 is what needs to be done Egor
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|