|
Joined: Oct 2009
Posts: 410
Member
|
OP
Member
Joined: Oct 2009
Posts: 410 |
Lucent Excel (Cantata) EXS-2000 Switch
Programmable Class IV Tandem Switch with DSP. NEBS Level 3 certified. Year of manufacture 2000. Removed from working service during forklift upgrade of Oryx Priority Call voice mail system (CO voice mail). Will sell entire switch as-is (no software), or we can sell individual cards as needed. PM for a complete list of cards, revision #'s, etc. Cards include 16-stream T1's, DSP's, SS7 PQ, etc.
No reasonable offer will be refused.
Jim **************************************************
|
|
|
|
Joined: Oct 2009
Posts: 410
Member
|
OP
Member
Joined: Oct 2009
Posts: 410 |
Bumpy bump....
Still sitting on this switch, four years have elapsed...
Anyone? NO REASONABLE OFFER REFUSED!
Be a shame for a switch that cost more than some houses to go to the scrappers, but that seems to be the way it is now days.
Jim Bennett ======================================== a/k/a/ Hopelessly Optimistic in PA
Last edited by Jim Bennett; 03/02/14 12:04 PM. Reason: typo
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
unfortunately its like this with electronics ,and they certainly dont go up in value and the floor space is worth more then the system, I had the same thing with old dimensions.finally I sold them There were 70 barrel of cards and 12000 pounds of cabinets.
Good luck
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Had a room full of Horizon stuff, long ago in a Galaxy far, far away.
|
|
|
|
Joined: Mar 2014
Posts: 2
Member
|
Member
Joined: Mar 2014
Posts: 2 |
Hi Jim,
Can you tell what card are inside the switch. Like is there MX/CPU board 68-2000-11 ?
|
|
|
|
Joined: Oct 2009
Posts: 410
Member
|
OP
Member
Joined: Oct 2009
Posts: 410 |
mishenyka,
sorry about the delay, we were away all weekend.
The CPU boards in this switch are EXS-CPU-1202 boards, assembly number 68-2126-03 rev E16.
Many folks who are using these switches have upgraded the CPUs to third- or fourth-generation boards from Cantata, which came along with dedicated VoIP interface boards and new software to bring an EXS-2000 up to a CSP-2090.
;begin rambling
A brief and incomplete history, if anyone is interested: Lucent payed a small fortune to purchase Excel, at the time [turn of the century], it was the cutting edge of programmable switches and could be mated with existing 4ESS and 5ESS installations to provide all manner of "next-gen" services. Then they decided that they really didn't want to be in the CO switch business any more, and dumped Excel like a hot potato. Excel then merged with a struggling Brooktrout Technologies to form Cantata. Cantata took the existing EXS system [which also had excellent DSP options], and turned it into the CSP, or Converged Services Platform, a pricey TDM/VoIP gateway for small CO's, CLECs, etc.
Cantata hung around for a while until they were purchased by Dialogic. Dialogic kept the line alive for a while, and eventually retired it. I think it was just the cost that made these switches undesirable - NEBS 3 equipment costs real money compared to plastic throwaways.
Jim ================================================== Speaking from a secure undisclosed location.
|
|
|
|
Joined: Mar 2014
Posts: 2
Member
|
Member
Joined: Mar 2014
Posts: 2 |
Hi Jim,
Thanks for you reply. Where would you suggest me to look for those boards ? Or actually i need their RTM cards. The LNX MX ETH I/O 64K,SEC (101-3688-02/03)LNX-MIO-2231 Part number 67-1093-00.
Will be glad to here from you any suggestions.
mishenyka
|
|
|
|
Joined: Oct 2009
Posts: 410
Member
|
OP
Member
Joined: Oct 2009
Posts: 410 |
mishenyka,
sorry about the delay. I just looked through all the Excel docs that I have here, and those boards are not showing up at all. They are either much older or much newer than what is in my manuals.
There are a lot of ebay sellers that have Excel stuff, as I am sure you already know. There are also a lot of used equipment brokers that come up in a google search, which you have probably already checked... I have never dealt with any of them, so I can't recommend one over the other.
Can anyone here on the list recommend a broker that sells used Excel/Cantata stuff?
Sorry I couldn't be more help, I will keep my eye out for those boards in my travels.
Good luck with your search, Jim Bennett
|
|
|
Forums84
Topics93,883
Posts637,024
Members49,675
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
59
guests, and
15
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|