|
|
|
|
Joined: Apr 2005
Posts: 27
Member
|
|
Member
Joined: Apr 2005
Posts: 27 |
Hi.. I have never programmed or even messed with one of these phone systems before. I am trying to get into programming. When I press, ********** I get a busy signal. Its that supposed to happen or am I doing something wrong? The prgramming manual says I should be getting a "Tone Burst" but i dont know what the tone burst is supposed to sound like. This phone system was a trade in from a church and I would like to default it so I can let another church use it while I send their phone system off for repair..
Thanks for any help..
Matthew
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Please don't post default passwords or any other common password on the open forum. Also, please take the time to read the rules for posting here at your next opportunity.
My first guess is you are not entering the codes at the first extension on the system, Ext #10 first station port. If you want to send me a PM with all your info I will try to help you out.
Mark
|
|
|
|
|
Joined: Apr 2005
Posts: 27
Member
|
|
Member
Joined: Apr 2005
Posts: 27 |
I do apologize as I did not know this was a password. Had I know this, I would not have posted the information on this site. There was nothing in the book that said this was a password.
|
|
|
|
Forums84
Topics94,551
Posts640,098
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
