|
|
|
|
Joined: May 2008
Posts: 4
Member
|
|
Member
Joined: May 2008
Posts: 4 |
I have 2 fx11 systems networked(hub and node) with voip gateway cards in the fx 11 systems. At hte hub side there is a t1 connected to a dialer that calls extensions at both the hub and node sites and these extensions basically stay connected throughout the day. At the node site thet experience where they cannot hear the caller but can be heard by them, they also say they get buzzing. Both the node and hub get calls from the sam t1 but only node is affected. Comdial tech has called in to both sits and confirmed programming is good. Help, any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
How often does this happen? How far apart are the two locations? If they can have downtime put the node beside the hub with a small switch and eliminate the network.
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552 Likes: 5
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 Likes: 5 |
What software versions are the two systems?
Justin
|
|
|
|
|
Joined: Nov 2002
Posts: 343
Member
|
|
Member
Joined: Nov 2002
Posts: 343 |
|
|
|
|
|
Joined: May 2008
Posts: 4
Member
|
|
Member
Joined: May 2008
Posts: 4 |
Originally posted by RATHER BE FISHING:
How often does this happen? How far apart are the two locations? If they can have downtime put the node beside the hub with a small switch and eliminate the network.
|
|
|
|
|
Joined: May 2008
Posts: 4
Member
|
|
Member
Joined: May 2008
Posts: 4 |
The 2 systems are 100 miles apart, and there is not really any down time, The main problem is that this only happens about once a week or less, then they have to reboot both systems.
|
|
|
|
|
Joined: May 2008
Posts: 4
Member
|
|
Member
Joined: May 2008
Posts: 4 |
Originally posted by 5years&counting:
What software versions are the two systems?
Justin They are at 19a I believe.
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
FXIIs are release 17. I'd upgrade them to 17F and the networking board firmware to 4.
|
|
|
|
Forums84
Topics94,529
Posts640,027
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
448
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
