|
|
|
|
Joined: Jun 2008
Posts: 3
Member
|
|
Member
Joined: Jun 2008
Posts: 3 |
we have a MP5000 and 2 FX-II systems set up in 3 different buildings, all connected using gateway blades. I would like to page from one building to the other, or all three at once.
does anyone know (if possible) if the systems can be configured to page the other buildings? I have looked at the paging zones, but they only include the local external port and the local extensions...
Any help here would be greatly appreciated
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2002
Posts: 343
Member
|
|
Member
Joined: Nov 2002
Posts: 343 |
Check out the ip paging adapters that are available. Never used one but they are out there.
|
|
|
|
|
Joined: Feb 2005
Posts: 42
Member
|
|
Member
Joined: Feb 2005
Posts: 42 |
You can feed an IST port into an LST port at each location and modify ARS digits to get what you want. This would allow only one building to the other, not all three at once.
|
|
|
|
|
Joined: Jan 2005
Posts: 88
Member
|
|
Member
Joined: Jan 2005
Posts: 88 |
We had the exact same setup and used the Valcom IP adaptors and the worked great
|
|
|
|
|
Joined: Jun 2008
Posts: 43
Member
|
|
Member
Joined: Jun 2008
Posts: 43 |
I have it working using nah's method. The customer is happy with it. They are networked with the Hub in Jersey then NODES in Palo Alto Cali, and Pompano Beach Fla.
|
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (MooreTel),
218
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
