|
|
|
|
Joined: Jun 2005
Posts: 211
Member
|
OP
Member
Joined: Jun 2005
Posts: 211 |
Can I pull a CO Line from a DX80 without making programming changes?
The office in question has significantly reduced staffing, so the 7 lines in their DX80 are now overkill. However, there is a need for an additional fax line in the warehouse. Reusing an existing line is the preferred plan.
I have no Comdial experience, but do have the DX80 manuals. However, I don't have the software (& won't know the firmware rev until I get onsite), and the interconnect that originally installed the system is long since defunct. To make things a bit more interesting, the office is 2 hours away. I have other cabling work to do there, but I'd sure like to wrap this up in one trip.
If I yank line #7 from the system, is it smart enough to detect that voltage is no longer present and use the next available line for outbound calling?
-Steve
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
yes. you can just unplug it from the modular co line port and you'll be fine. Make sure the customer tells the telco to remove that line from the incoming hunt group if it is part of it.
|
|
|
|
|
Joined: Jun 2005
Posts: 211
Member
|
|
OP
Member
Joined: Jun 2005
Posts: 211 |
Beautiful. Thank you, Mark!
-Steve
|
|
|
|
Forums84
Topics94,294
Posts638,835
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
149
guests, and
333
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
