web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#421911 05/20/04 11:17 AM
Joined: May 2004
Posts: 5
mastas Offline OP
Member
OP Offline
Member
Joined: May 2004
Posts: 5
Have 2 keysets hooked up to the DLI card. The LCD shows correct data and the dcs can be programmed from the keysets, but there is no tx/rx either from the speakerphone or handset. I checked the SLI phones and they work fine. Any suggestions? This system was working fine last year and when we went to boot up the system again, this happened.

Any help much appreciated.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#421912 05/20/04 12:32 PM
Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
Have you tried different ports on the dli card?Not sure what you mean by the sli phones work ok? or do you have an sli card and it works fine.Is the problem on internal and external calls?Never seen it before but if you have more than 1 dli card do they all have this problem or just 1 card?
If it's not a big deal try defaulting the system and starting over see if a default cures it.

[This message has been edited by pvj (edited May 20, 2004).]

#421913 05/20/04 01:22 PM
Joined: May 2004
Posts: 5
mastas Offline OP
Member
OP Offline
Member
Joined: May 2004
Posts: 5
We have 1 DLI card...tried different ports on it with no luck...to further elaborate, theres not even a tone when the handset or speakerphone is off hook. When I manually key in the trunk, I can hear the pbx click and I can dial out...again I hear no dial tone, ringing, etc. When the party picks up..I can't hear anything from them...and the only thing they can hear from me is if I key numbers.

when I said SLI phone..I meant phones hooked up to the sli card.

Can the DLI card be malfunctioning? I've cleared the memory..reset the system and reset the DLI card...but no luck..

#421914 05/20/04 03:29 PM
Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
I would guess that the Dli card could be faulty but can you use the intercom? If not I would say try another Dli card.

#421915 05/20/04 03:56 PM
Joined: May 2004
Posts: 5
mastas Offline OP
Member
OP Offline
Member
Joined: May 2004
Posts: 5
Intercom? you mean the speakerphone? or is that a seperate feature? if they are the same then yes...i get no tx/rx from the handset and intercom...

#421916 05/21/04 12:50 AM
Joined: Jul 2003
Posts: 6,768
Member
Offline
Member
Joined: Jul 2003
Posts: 6,768
Do you have any call keys programmed on the key sets, you can't even call a keyset unless it has a call key programmed.

#421917 05/21/04 02:15 AM
Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
By intercom I mean station to station.If you defaulted the system then you should have a call key by default on the digital keysets but can you call from station to station?I still think you have a bad Dli card ,have you tried all 8 ports on it?
Do the digital phones show an extension number on the screen when idle?

[This message has been edited by pvj (edited May 21, 2004).]

#421918 05/22/04 02:02 PM
Joined: May 2004
Posts: 5
mastas Offline OP
Member
OP Offline
Member
Joined: May 2004
Posts: 5
Yes, the system does have a call key...

The analog phones can call station to station with no problem. In fact everything hooked up to the SLI card is functioning normally. The digital keysets have no tx/rx audio either through the speaker or handset, station to station or accessing a C.O. line.

The digital keysets show an extension...in fact, everything seems to be functioning normally with the exception of tx/rx audio.. I've moved ports with the same results with the exception of the new ext # showing up on the LCD.

I was assuming that it was maybe a bad DLI card, but I had a local tech come in and check it out...He looked at some MMCs and even swapped out the DLI card to no effect. He didn't have time to do extensive testing which leaves me where I am now... Now that he confirmed the DLI card is fine.. I'm being lead to believe its some MMC I'm missing. I have the programming manual, but to the life of me I can't figure out which one it is...I tried #807 and maxed out all the volumes, but that didn't do anything (other than raise the volume on all the beeps)...I've tried #805 (tx level)..but I get an invalid program code, so I'm assuming this MMC doesnt exist in this software. I'm about to scroll through every MMC and see if theres a program that is not listed in the manual I have.

#421919 05/23/04 02:10 PM
Joined: May 2004
Posts: 756
Likes: 2
Member
Offline
Member
Joined: May 2004
Posts: 756
Likes: 2
Have you cleared all memory on the system, a complete restart. This will put you to a "beginning" default. At this point all should work. If not then we from there. If anymore trouble,e-mail me. This can be fixed.

#421920 05/23/04 05:53 PM
Joined: Sep 2001
Posts: 2,329
Likes: 7
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,329
Likes: 7
What about moving the Dli card to a different slot in the ksu?If you try that default the system again and let us know.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,708 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
teleco 4
Who's Online Now
3 members (Yoda, Toner, Curlycord), 131 guests, and 245 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5