|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
Pardon my ignorance of Samsung switches, but have inherited the care & feeding of this one. Some, but not all of the stations have suddenly quit ringing. How do I access the programming to put them in an active group or re-enable ringing? Please email privately any passwords or not-for-public viewing info to: [email protected]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
If they were in the ring group before then they may have logged out of the group. First you need to know what group it is then you can try this 53XXX where XXX is the group. Type in a 1 for in group or 0 for out of group after the 53XXX.This is done on a per station basis but the rule is that the station must be a member of the group in mmc 600 (for the operator 500 group)or mmc 601 (for groups 501-529)
|
|
|
|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
Thanks, I found that those stations are members of a group "01" and I could not get the 53xxx to respond. In what mode or program ID do I enter the "53xxx"?
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
If they are already a member of group 501 then you would dial 535011 to get them back into the group(logged in).You dial this from intercom dialtone or just dial it from an idle handset without lifting the handset.
|
|
|
|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
OK, we dialed 535011 on each of the non ringing stations and the display screen read "1" but they still don't ring with incoming calls. do we need to check line assignment or ring enable?
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Well sure you can check the ringing assignment im mmc 406 and see what it's set to.Then check out the group as described above and see if the stations are members of the group.If not add them in as members to the group. Maybe your group numbers have been changed from default?Because on a default system if you dial 53501 you should see on the display group status IN OUT The fianl number 1 being pressed is equivalent to hitting the IN key.
|
|
|
|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
We dial 53501 and get a "1" on display. but still not ringing on incoming calls
|
|
|
|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
also, should have said - we do not see " IN " or "out" on display when keying "53501"
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
If you dial 53501 and get a 1 on the display then after 5350 the system is saying the 50 is not right.To test that out dial the digits 53501 1 ata time and watch the display.I bet your getting an invalid number screen after the 4th digit.Your station group plans are not default then.You said the ringing was to 01.Under defualt numbering it would be 501 not 01.Check mmc 601 and see waht the first group in there in numbered as.Then dail 53 +that number +1.
|
|
|
|
Joined: Sep 2003
Posts: 19
Member
|
OP
Member
Joined: Sep 2003
Posts: 19 |
Thanks!, again I am unlearned on Samsung... how do i check mmc 601?
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
125
guests, and
360
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|