Assign an extension to each port.

Print Thread

Rate Thread

Assign an extension to each port. #423002 03/01/05 10:38 AM
Joined: Feb 2005 Posts: 81 Georgia The_Assistant Member
The_Assistant Member Joined: Feb 2005 Posts: 81 Georgia	Hi. I have a simple question. How do I assign an extension number to a port? There is a new install that want everyone's extension to be exactly the same as the old phone system. Does anyone know which MMC is used for this? Thanks.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Assign an extension to each port. #423003 03/01/05 01:06 PM
Joined: May 2004 Posts: 761 Likes: 2 Upstate New York phonman123 Member
phonman123 Member Joined: May 2004 Posts: 761 Likes: 2 Upstate New York	What type od system are you working on?

Re: Assign an extension to each port. #423004 03/01/05 01:50 PM
Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada pvj Moderator-Executone-Isoetec, Samsung
pvj Moderator-Executone-Isoetec, Samsung Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada	If it's a digital system then you do it in mmc 724.

Re: Assign an extension to each port. #423005 03/02/05 02:00 AM
Joined: Nov 2004 Posts: 40 Chico, Ca, USA Big Mike Member
Big Mike Member Joined: Nov 2004 Posts: 40 Chico, Ca, USA	Be very carefull doing this. When asked, I discourage it. As a compromise, a few times I have matched the last two numbers of their new three digit extension with thier old one. For example, if they had a Partner, I can assign them 210 through whatever (instead of 201). Anything but 200 and 300 series extension numbering will give you grief. Good luck.

Re: Assign an extension to each port. #423006 03/02/05 02:44 AM
Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada pvj Moderator-Executone-Isoetec, Samsung
pvj Moderator-Executone-Isoetec, Samsung Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada	I disagree with that.Last week I put in a iDCS100 replacing an Executone with 3001-3020 extension numbers.I redid all the extensions in mmc724 before I put the voicemail system in and then did a download from the switch to the SVMi4E.Seems to work flawlessly with no problems.

Re: Assign an extension to each port. #423007 03/02/05 05:32 AM
Joined: Mar 2005 Posts: 10 Green Bay, WI USA Young'un Member
Young'un Member Joined: Mar 2005 Posts: 10 Green Bay, WI USA	Easiest way is to write it all out.. make an excel spreadsheet going from 100 to 1000 then write in the assignments as you plan it out. When I was 8 yrs old my parents had me making CX and PX Cables by hand. Phones are in my blood.

Moderated by nameless, pvj

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Assign an extension to each port.