|
|
|
|
Joined: Jun 2007
Posts: 36
Member
|
OP
Member
Joined: Jun 2007
Posts: 36 |
I have a DXP-Plus with two cabinets. In the second cabinet I have a CO card, analog station board and a T1 card. The T1 card recently stoppped working and has only 3 red lights. The circuit from the service provider seems to be working ok the CSU/DSU lights are all green and it does detect when I unplug from the T1 card. I have changed the T1 board and the new board is having the exact same response. The CO line card and station card located in the same shelf are working fine. Could this be a CSU or services board problem. I'm not sure where to go from here. Nothing has changed in the programming, the T1 board just stopped working.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
I'll bet it is the CSU; they fail quite often. Remove it and connect the card directly to the circuit.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
348
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
