|
|
Joined: May 2005
Posts: 2
Member
|
OP
Member
Joined: May 2005
Posts: 2 |
I currently have a Prostar DCS with one T1 card one TrkA1 one TrkB1 one TrkC1 All the trunks are being used. There is one open card slot in cabinet 1 slot 6. Can this be used for additional Trunks? When I install a trunk card the system does not seem to recognize it.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
After you installed the card did you do mmc 806 to initialize the card and then mmc 724 to assign the trunk numbers?
|
|
|
|
|
Joined: May 2005
Posts: 2
Member
|
|
OP
Member
Joined: May 2005
Posts: 2 |
No I did not. Do you have instructions?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 5
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 5 |
You need to access programming at technician level.
Transfer 800
Passcode
1
Speaker
806
Select cabinet and slot of new card install
Then Speker 724
Go to trunks and assign new ports with trunk numbers.
If you have no experience doing it I would recommend you get a dealer to do it for you.
|
|
|
|
Forums84
Topics93,878
Posts636,994
Members49,671
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (jonnycom),
171
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
