|
|
|
|
Joined: May 2005
Posts: 2
Member
|
OP
Member
Joined: May 2005
Posts: 2 |
I currently have a Prostar DCS with one T1 card one TrkA1 one TrkB1 one TrkC1 All the trunks are being used. There is one open card slot in cabinet 1 slot 6. Can this be used for additional Trunks? When I install a trunk card the system does not seem to recognize it.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
After you installed the card did you do mmc 806 to initialize the card and then mmc 724 to assign the trunk numbers?
|
|
|
|
|
Joined: May 2005
Posts: 2
Member
|
|
OP
Member
Joined: May 2005
Posts: 2 |
No I did not. Do you have instructions?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
You need to access programming at technician level.
Transfer 800
Passcode
1
Speaker
806
Select cabinet and slot of new card install
Then Speker 724
Go to trunks and assign new ports with trunk numbers.
If you have no experience doing it I would recommend you get a dealer to do it for you.
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
156
guests, and
225
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
