|
|
|
|
Joined: Apr 2005
Posts: 14
Member
|
|
Member
Joined: Apr 2005
Posts: 14 |
Can anyone tell me whether or not this box can handle Caller ID? I know the service is being provided by our Telco, but calls that come into our PBX aren't presenting the caller's number. This is a 'clean' PBX in that I reset the system and cleared its memory, before doing basic setup - naming extensions etc. Incoming and outgoing calls work fine and I've enabled CLIP as far as I know using MMC 119. Any ideas guys (or gals!) Thanks! Make Poverty History
No matter where you go,
there you are!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
Do you have the card installed to support caller id?
|
|
|
|
|
Joined: Apr 2005
Posts: 14
Member
|
|
Member
Joined: Apr 2005
Posts: 14 |
I've taken on this box from the company that used to occupy this building, so I don't know what boards are installed.
Is there any way to find out what's installed without opening the box? So I guess it doesn't support Caller ID as standard?
No matter where you go,
there you are!
|
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
You need a misc card to run the caller id.In Canada they package the misc card in the with the system so I really can't tell you if you have it or not.You should be able to go into mmc 727 and see if the card exists in the system or just open the cover and see if its physically installed.You also need to assign mmc 414 as cid trunks as well and mmc 312 to enable it for the stations.
|
|
|
|
|
Joined: Apr 2005
Posts: 14
Member
|
|
Member
Joined: Apr 2005
Posts: 14 |
Thanks for your help! There's no board inside the machine so I'll search for a UK supplier and get one.
Thanks again,
Mark
No matter where you go,
there you are!
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
146
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
