|
|
|
|
Joined: Jan 2006
Posts: 37
Member
|
|
Member
Joined: Jan 2006
Posts: 37 |
I've got an iDCS500 & 100 networked together accessing two different telephone networks, the 500 is PRI,the 100 is analog trunks.
I've got some audio codecs that use analog modems and they need to connect across the network between the 100 & 500. Levels are critical for these modems, I'm looking for advice suggestions on the best way to set the level & gain in both switches for unity gain and best audio quality.
According to the codec manufacturer they like to see levels in the -10 to -15db range for best performance and loop current in the 25-35mA range. I've verified loop current on a Sidekick but I'm looking for a good way to verify audio levels.
Obviously I can use the Sidekick for measuring the audio level but I need a good level source (i.e. telco milliwatt generator) but due to recent # changes no one in town knows any numbers to call and those who do won't say.
Suggestions?
Brett Gilbert
LightGuy48
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2006
Posts: 37
Member
|
|
Member
Joined: Jan 2006
Posts: 37 |
FWIW, I did some tests today and found even when going switch to switch using the SLT ports at each end I get a good connect rate (28.8k) but I'm getting glitches that cause the modems to renegotiate.
I'm not seeing any bit errors on the T1 connection between the switches and I can't hear any audio problems so I'm lost as to what might be the problem.
Shouldn't the A to D and D to A converters be good enough for modem usage?
Brett Gilbert
LightGuy48
|
|
|
|
Forums84
Topics94,513
Posts639,938
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
167
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
