|
|
|
|
Joined: Nov 2005
Posts: 42
Member
|
|
Member
Joined: Nov 2005
Posts: 42 |
Hello all again,
I have my voicemail system and Autoattendant and call groups up again. However, I'm having a problem that when someone calls and gets to the autoattendant when they hang up the system does not hang up the call. It continues to cycle through the call group. Is there something I missed in the setup?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Please post a scenario of how this happens.
As I understand you, a caller reaches the auto attendent, takes no action and hangs up but the call is still connected. Somehow I don't think this is your real scenario.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Sep 2005
Posts: 690
Member
|
|
Member
Joined: Sep 2005
Posts: 690 |
possible trunk not releasing issue. What voicemail system are you using? Some have some parameters that can help and also on the PBX side what are the trunks set up as PBX or CO trunks?
|
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
what type of lines are you useing are they pots? or Vonage type lines.
if you set one line to ring 201 and call in does it hang up?
the Cadence also has a disconnect on silence setting have you checked it?
|
|
|
|
|
Joined: Nov 2005
Posts: 42
Member
|
|
Member
Joined: Nov 2005
Posts: 42 |
Bunny,
Yes that is what is happening. Caller dials in gets AA. hangs up and the call loops through. never releases.
benb,
I am using cadence and I believe they are just CO trunks.
wrichy,
pots I think they are.
all the lines ring to 201 except two backdoor lines.
I have not checked the disconnect on silence...can you point me in the direction to check that.
|
|
|
|
|
Joined: Jul 2006
Posts: 99
Member
|
|
Member
Joined: Jul 2006
Posts: 99 |
Have you verified that the lines disconnect properly without Voicemail?
The best way to do that is to call into the system and answer the call. Then hang up on the remote side, watch the call key if it goes out quickly then it is not a line issue it is a voicemail issue. If it stays lit then you need to do the same thing but after the connection is made physically remove that line from the block, if the call key turns off immediately then it proves the problem is with the line and you need to either adjust your disconnect timer (MMC 503 Super.Timer)or contact your Carrier and see if they are sending a disconnect signal.
|
|
|
|
Forums84
Topics94,513
Posts639,937
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (PhoneGuy827),
335
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
