sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Data Switch for IP Connections

Does anyone have any recommendations for a Data Switch, that I can use to interfact between a OS100 MCP and MGI card and the teleco's Adtran equipment?

You need just a small switch? no nat or firewall? if you need routing and firewall stick with the adtran

I like the Netvanta 344 but its a little pricey

If its just basic that you need and no routing ability then any little 5 port switch will do.

Hope that helped

The Adtran does not provide IP addresses for whatever is connected to the Adtran equipment though, right? I would think that you would need a router then a switch plugged into the router then plug your equipment into the switch. I could be mistaken though.

thats what the 344 is, its a router with 4 ports

it just connects to the adtran he has existing.

this is it

TelePacific delivers the Flex T1 bundle in Vegas to a Adtran Total Access 600, which is a T1 Router. Off of WRichey's suggestion, I connected the MCP, MGI and SVMi to a $20.00 5 port switch, called TelePacific and told them what TCP & UDP ports I needed opened on each of the Static IP's. And presto - everything came up. All I had to do was set my MCP, MGI and SVMi IP addresses.

Thanks WRichey for the advice.

:thumb:

Learn something new everyday.