|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Have a old STC Prostar. Added new line#7 No dial tone on 7 or 8. All programming set correctly and stations work on this expansion module. Swapped the 5-6, 7-8 204 modules and problem moved. Site had a newer Samsung Prostar with an expansion module. Installed this newer version into the 7-8 position. The CO's worked fine but the switch didn't like it! Fired up the newer Prostar but it was DOA. So finally the question!! Are there revision differences that would not allow a newer version to work in an older cab or was this board broke?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
As I recall the new boards didnt work in older ksus,but the older ones worked in the new. I think they put out a tech fact on this , maybe someone has those old yellow releases around.
|
|
|
|
Joined: Nov 2006
Posts: 53
Member
|
Member
Joined: Nov 2006
Posts: 53 |
I just looked on my shelf and have 1) 2co x 4ext, 2) 2co x 4slt, 1)smdr card, and 1)door phone for the STC Prostar. These were purchased and sat on the shelf for years. I can pull serial numbers if needed. If your interested in cleaning my prostar shelf let me know. I also have a Macrotel 816 switch that came in on trade that is taking up space.
|
|
|
|
Joined: Nov 2006
Posts: 196
Member
|
Member
Joined: Nov 2006
Posts: 196 |
If your cabinet is marked STC Prostar, you have a pre-Samsung version. I pulled out my old Samsung binder and looked thru the tech sheets but nothing was old enough to talk about the transition from STC to Samsung. But as I recall, KENB is right.
The STC exp cards work in the Samsung cabinet but the Samsung cards aren't backwards compatible. I think the STC cards are marked "816H" on the top-left of the component side. If you need to stay with that cabinet, I'd take 1A2DIGITAL's offer. Probably the only other way to get a card that would work would be to find a working expanded STC 816 cabinet and rob the exp card(s). If 1A2DIGITAL's stock isn't STC-compatible, PM me. I think I still have a 2x4 SLT card on the shelf. That should give you the CO's you need but would make the added stations SLT only.
Harry at Telecom Equipment & Consulting Specializing in Mitel systems for the Hotel/Motel industry www.TECHarry.com
|
|
|
Forums84
Topics94,551
Posts640,107
Members49,861
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Carl Navarro),
1,551
guests, and
21
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|