|
|
Joined: Jul 2005
Posts: 52
Member
|
|
Member
Joined: Jul 2005
Posts: 52 |
Hi there. I hope you are doing well.
I need your help. I am doing some test with TEPRI in ISDN PRI.
The carrier (Telephone Service Provider) see in the setup of their equipment a pamaterer called "Screen Indicator" set it up as Suscriber Provider. This means that my PBX has the call control it`s master and the equipment of the provider it`s slave. They ask me to change this parameter to "Network provider" and now be the slave and the provider be Master, but I do not how. I wonder if you can help me.
I am know that I am a suscriber and Provider it`s network, but we are connecting in a kind of MODE as Master and we must to change to slave mode.
Thanks
Regards
Ing. Edgar Robles
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2005
Posts: 148
Member
|
|
Member
Joined: Nov 2005
Posts: 148 |
EdHunter,
Are they talking about clocking ????
Normaly we get our clocking from the PRI
-D
Dennis
Samsung Authorized Dealer, AVAYA reseller, One Communications Team Partner
|
|
|
|
|
Joined: Jul 2005
Posts: 52
Member
|
|
Member
Joined: Jul 2005
Posts: 52 |
No, the sync it´s OK.
Actually the service it´s working, but I have the call control, I mean. If I send any CLIP the called party will recive this CLIP and the provider wants have the call control.
They have somwthing that they call SET UP it´s a kind of LOG in this LOG they see a parameter called "Screen Indicator" in this pamaterer they see that we have a kind of connection Suscriber provider and when they connect with other vendor, the other vendor can change this from Suscriber to Network provider. In this case does not matter which CLIP I send, the CLIP that the called party will recive it´s the CLIP that the Provider send
|
|
|
|
|
Joined: Sep 2004
Posts: 395
Member
|
|
Member
Joined: Sep 2004
Posts: 395 |
There is a master/slave switch on the TEPRI card, which for me has been sent from the factory in the wrong position twice, but both times that happened the carrier couldn't bring the PRI up. The L2 light wouldn't come on until I changed the dipswitch. You could ask the carrier what type CO you are connected to and change MMC 430 to reflect that, ie NI1, NI2, DMS100, 5ESS, etc. You have to reset the PRI card after you do that though.
|
|
|
|
|
Joined: Jul 2005
Posts: 52
Member
|
|
Member
Joined: Jul 2005
Posts: 52 |
I`ll try this. But I remember that the PRI is UP, everything it`s working, but in a mode that if I sent the caller ID this caller Id it`s recived by the called party.
This MMC how it`s called, because in my system it´s TRUNK COS.
Thanks
Regards
Ing. Edgar Robles
|
|
|
|
|
Joined: Sep 2004
Posts: 395
Member
|
|
Member
Joined: Sep 2004
Posts: 395 |
MMC is named PRI control.
|
|
|
|
Forums84
Topics94,515
Posts639,966
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
