|
|
|
|
Joined: Jan 2008
Posts: 5
Member
|
|
Member
Joined: Jan 2008
Posts: 5 |
I just moved this system to a new location for a customer. i do not normally work on these. Everything works fine except line 5 (705) shows not in service. I really didn't know until i got it hooked back up that he had a fifth line. system was unplugged at old location when i arrived and he told me he had four lines...
so where on the block does port 705 go? honestly i tried them all and none worked but i would like to know where it's supposed to go so I can tell if there is a hardware issue.
I have the programming manual but cannot find the block diagrams... I assume they are in a separate installation manual. Thanks much
Chris
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
It really depends were the expansion card is installed.
|
|
|
|
|
Joined: Jan 2008
Posts: 5
Member
|
|
Member
Joined: Jan 2008
Posts: 5 |
So if there are three slots, would that not narrow it down to three positions on a 25pr punch down?
i am getting additonal extensions in the yellow range Pr 16 - 20 if that helps at all.
thanks
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
The installation/programming manual shows the station/line pin-out based on what type of card is in each slot.
|
|
|
|
|
Joined: Jan 2008
Posts: 5
Member
|
|
Member
Joined: Jan 2008
Posts: 5 |
apparently i have the wrong manual or i am not looking in the right place. The unit is a DCS PROSTAR COAMPACT (on the cover). Power supply on the right hand side. Expansion slots are at the top (3 slots).
The manual i have is the
SAMSUNG
COMBINED
PROGRAMMING
MANUAL
for
DCS
DCS COMPACT
DCS COMPACT II
DCS-816
DCS-408
DCS-408i
It covers the MMC's thoroughly but i cannot find anything related to the actual installation. i have a picture i can email if that helps anyone.
Thanks much
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
|
|
|
|
|
Joined: Jul 2009
Posts: 7
Member
|
|
Member
Joined: Jul 2009
Posts: 7 |
What cards are in the expansion cabinet? Slot 1 is at the top. Slot 1 = ?, Slot 2 = ?, Slot 3 = ?
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
Please note above this is being handled via PM because it goes beyond user information!
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (C5Z),
106
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
